Hegen Breast Pump Spare Parts: A Care Guide to Keep Suction Strong

Hegen Breast Pump Spare Parts: A Care Guide to Keep Suction Strong

On a busy morning, you’ve set aside a special moment to pump before starting the day. But the moment you switch on the pump, nothing happens. No suction. No milk flow. Just silence. Panic, confusion, and a bit of frustration begin to creep in.

Take a breath, Mama. In most cases, the breast pump itself isn’t actually broken. What usually wears out first are the breast pump spare parts, such as the valve, membrane, or other silicone components. These small parts work incredibly hard every single day, so it’s natural for their elasticity to decrease over time.

This is why it’s so important to understand how to care for your breast pump and how to recognize genuine Hegen spare parts to keep your pump performing at its best. With proper maintenance, your pump not only lasts longer but also ensures every drop of breast milk stays hygienic and safe for your little one.

Why Breast Pumps Need Regular Maintenance

A breast pump, especially an electric model like the Hegen PCTO™ Electric Breast Pump, operates using gentle pressure and rhythmic patterns that mimic a baby’s natural suckling. To keep performance stable, every internal spare part must be in optimal condition.

Common factors that reduce pump performance include:

  1. Valves or Membranes Losing Elasticity: When a valve weakens, it can no longer create a full vacuum. As a result, suction becomes weaker even when you increase the mode to the highest level.

  2. Silicone Components Thinning from Repeated Sterilization: Silicone is soft and sensitive to extreme temperatures. Frequent boiling or improper sterilization can cause it to stretch, warp, or thin out.

  3. Loose Connectors Causing Air Leaks: Even the smallest air leak disrupts the vacuum, significantly reducing suction strength.

Important note: Small but consistent maintenance helps extend your pump’s lifespan, maintain efficient suction, and ensure your breast milk remains clean and safe for your baby.

Signs Your Pump Spare Parts Need Replacing

Sparepart Pompa Asi

Before assuming the pump is completely broken, you can check for several signs:

  • Suction feels weak even at the highest level.

  • You hear a faint “hissing” sound, indicating air leakage.

  • Milk doesn’t flow or flows very slowly even though let-down has already occurred.

  • Silicone parts appear discolored, yellowish, or feel sticky.

  • The valve feels softer, stretched out, or shows small tears.

If any of these signs appear, it’s very likely that the breast pump spare parts need replacing, not the entire pump.

Why Genuine Hegen Spare Parts Matter

Replacing spare parts is indeed the best way to restore pump performance. However, it’s crucial to ensure you’re using genuine Hegen spare parts, because only official components are engineered to work optimally with the Hegen pumping system.

Advantages of Genuine Hegen Spare Parts:

  1. High Precision for a Closed System: Each component is designed to lock into place perfectly, keeping the system hygienic and preventing air leakage.

  2. Food-Grade & BPA-Free Materials: Safe for direct breast milk contact, free from harmful substances.

  3. Cross-Series Compatibility: Valves, diaphragms, connectors, and tubing can be replaced easily without worrying about mismatched parts.

  4. Consistent Pump Efficiency: Non-original spare parts can disrupt vacuum pressure, weaken suction, and even risk contamination.

  5. Readily Available Official Components: Hegen provides individual spare parts so mothers can maintain their pumps without needing to purchase a new device.

With genuine spare parts, you can ensure every pumping session remains smooth, effective, and safe for your baby.

How to Clean and Maintain Your Hegen Pump for Longevity

To keep your pump performing at its best, follow these care steps:

  1. Wash every component with warm water and mild baby-safe soap.

  2. Use a soft brush for small areas like valves and connectors.

  3. Dry all parts completely before reassembling to prevent mold.

  4. Follow Hegen’s sterilization guidelines and avoid extreme temperatures that can damage silicone.

  5. Regularly check the elasticity of the valve and diaphragm.

  6. Reassemble carefully and ensure all parts are tightly sealed to avoid air leaks.

Proper maintenance not only extends the pump’s lifespan but also keeps breast milk clean, sterile, and safe for your little one.

Also read: Tips for Choosing the Right Breast Pump Flange Size: A Key to Comfort for Breastfeeding Mothers

How to Safely Replace Hegen Spare Parts

Sparepart Pompa Asi

Here’s a simple guide to help you replace your pump’s spare parts safely:

  1. Gently remove the old valve or membrane to avoid damaging its base.

  2. Install the new component by following its original grooves and ensure it fits tightly.

  3. Turn on the pump briefly to check whether the suction has returned to normal.

  4. Store extra spare parts in a sealed container to keep them clean and hygienic.

Replacing spare parts is more than a technical step, it’s an expression of care, a way for mothers to protect the quality of every drop of milk they give to their baby.

Hegen After-Sales Support: Always Here for You

Hegen understands that mothers need more than just a pumping device. You need support, guidance, and easy access to the components that keep your pump performing well.

That’s why Hegen provides:

  • Official spare part replacement guides

  • Online educational resources

  • Genuine spare parts available through official stores and e-commerce

  • Product warranty and technical support

With Hegen, you never have to worry about losing pump performance, every component is easy to replace and always accessible.

Also read: Manual Breastfeeding Pump: A Calm and Convenient Solution for You and Your Baby

Care with Love, Pump with Confidence

Caring for your breast pump isn’t just about maintaining the device, it’s about protecting the purest nourishment your baby receives. With genuine Hegen spare parts and consistent maintenance, your pump will stay reliable from the first session to the very last drop.

A well-maintained pump lasts longer and helps preserve the meaningful moments of your breastfeeding journey. Hegen is here to support every step you take, even the smallest details.

Back to Hegen Blog